Waterproofing ( APP Membrane )

APP Membrane Waterproofing The APP Membranes, offered by us are formulated using quality-tested ingredients and modern formulation techniques. Owing to the their properties like acid resistance, good dispersion, precise pH value and permanent stable color, the offered products are highly demanded in the market for coating purposes. To match up with the varied needs of the clients, we offer these products in numerous packaging options. We are offering these APP Membranes at pocket friendly costs.solutions offered comprise bituminous roofing membranes comprising app modified bituminous waterproofing membranes in form of waterproof material, waterproofing membrane as well as waterproofing membranes. The use of polyester reinforcement/fiberglass reinforcement as carrier, APP, APAO as modifier as well as use of covering insulation materials like sands, polyethylene foil or minerals slated also make these superior in performance.

Features:

• APP torch-on bituminous waterproof membrane
• Use of carrier like polyester reinforcement/fiberglass reinforcement
• Use of modifier like APP, APAO as
• Use of superior covering insulation materials like minerals slated, sands, polyethylene foil

APP Modified Waterproofing Membrane with Non Woven Polyester Matt Reinforcement:
Super Thermolay is a uniquely formulated prefabricated waterproofing Membrane with a special multilayered design, with superiorpliability, tensile strength, workability and resistance to the elements.

This combination gives the proven waterproofing qualities of bitumen plasticity, excellent resistance to heat, aging and weathering, and ease of application by torch welding.

The multilayered design consists of a 160 gsm polyester core coated on both sides with APP (atactic polypropylene) modified bitumen and finally finished with thermofusible polyethylene film. The polyester core gives the membrane high tensile strength, elongation and superior lap joint strength.

APP Modified Waterproofing Membrane with Glassfibre Matt Reinforcement:
STP APP (atactic polypropylene) modified bitumen membranes are produced from a blend of special polypropylene thermoplastic polymers and distilled Bitumen. This combination gives the proven waterproofing qualities of bitumen plasticity, excellent resistance to heat, aging and weathering, and ease of application by torch welding.

Aqua Shield is a rot-proof, dimensionally stable 50 gsm glassfibre matt core coated on both sides with APP Modified Bitumen, which is finally finished with thermofusible polythene film.

Waterproofing ( TPO Membrane )

Firestone UltraPly TPO is a flexible Thermoplastic Polyolefin roofing membrane that is produced with polyester weftinserted reinforcement. UltraPly TPO membrane meets or exceeds all requirements for ASTM D 6878 Specification. This heat weldable TPO membrane is available in 45 mil (1.14 mm) and 60 mil (1.52 mm) thicknesses. This reflectivemembrane is suitable for a variety of low-slope applications.

Method of Application:

1. Substrates must be clean, dry, smooth, and free of sharp edges, fins, loose or foreign materials, oil, grease, and othermaterials that may damage the membrane.
2. All roughened surfaces that can damage the membrane shall be repaired as specified to offer a smooth substrate.
3. All surface voids greater than ¼" (6.3 mm) wide shall be properly filled with an acceptable fill material.
4. Firestone UltraPly TPO membrane is installed as continuous roofing or waterproofing layer on the roof. Rolls areoverlapped (side laps and end laps) prior to the heat welding of the seam areas.
5. Install the UltraPly TPO Roofing System in accordance with current Firestone UltraPly TPO specifications, details andworkmanship requirements.

Storage:

• Store away from sources of punctures and physical damage.
• Assure that structural decking will support the loads incurred by material when stored on rooftop. The deck loadlimitations should be specified by the project designer.
• Store away from ignition sources as membrane will burn when exposed to open flame.

Precautions:

• Refer to Safety Data Sheets (SDS) for safety information.
• Exercise caution when lifting, moving, transporting, storing or handling membrane rolls to avoid sources of puncturesand possible physical damage.
• Contact your Building Systems Advisor at 1-800-428-4511 for specific recommendations regarding chemical or wasteproduct compatibility with Firestone UltraPly TPO Membrane.